Major 01’16

Electronic Music

Electronic Music

Major 01’16

廣義的「電子音樂」為透過電子合成器製作的音樂,現在則泛指以電子設備、電腦軟體等電子技術來合成,具有濃厚電子原音特徵的音樂創作,其耐人尋味的衝突感正是它的魅力所在。音樂製作隨著科技的進步與協助,讓聲音變化的可能性更無遠弗屆,因而產生跳脫傳統樂器與邏輯、更具想像力的電子音樂。

Feature

Major 01’16擁有5~40kHz以上的極致頻寬,可反應出電子音樂極端的細節變化,在重低音的表現深沉有力、突顯明確的顆粒感,中高音部分俐落分明、反應速度佳,整體敏銳且精準地演繹電子原音的特質,充份彰顯多元精彩的編曲變化與音樂性。

主要特點:

■ 反映極端變化的極致頻寬
■ 敏銳且精準的俐落聽感
■ 雙動圈單體結構

Impedance28Ω
Frequency Response5-40,000Hz
Sensitivity103dB at 1kHz 1mW
Wood WrapCarbon Fiber
Connector3.5mm (golden plated) & 6.3mm
Cable Length1.2m
Max Power Input8mW

Accessory

%
*可自行輸入百分比
*Input the run-in percentage
歡迎使用「Chord & Major 全頻煲機程式」
完整煲機流程約為60分鐘,請依以下指示開始進行煲機:

1.請將耳機與播放裝置連接。
2.請將播放裝置的音量設定至100%。
3.按下start鍵後開始進行煲機。
Welcome to Chord & Major Full Frequency Run-In Program
The whole progress is around 60 minutes, please go through the following steps:

1.Connect the earphone and the audio device.
2.Set the volume at 100% on device.
3.Press “START” to begin with the Run-in program.
*注意事項:
煲機過程中因頻率與音量的變化較大,不建議直接聆聽。
*Note:
Not recommend to listen to the music through earphone during running this program due to the high volume setting and frequency changes.

第一階段:線性跑動

Step 1: Linear-Drive

頻率運作範圍:0Hz~45kHz
時間:約20min
本階段針對耳機進行基礎熱身,讓耳機循序漸進地全頻運作,讓彈性恢復

Frequency: 0Hz ~ 45kHz
Time: 20 mins

This step is to do a basic warm-up for the earphone and let it play through all frequencies gradually to perform a better drive flexibility.

第二階段:瞬態反應

Step 2: Dynamic Response

頻率運作範圍:0Hz~45kHz
時間:約10min
密集的瞬間動態動作,進行更高壓的極端熱機,讓性能運作達最佳化。

Frequency: 0Hz~45kHz
Time: 10 mins

Through the frequent dynamic responses to highly congress the burn-in progress for maximising the functions.

第三階段:全頻緩機

Step 3: Full Frequency Ease-up

頻率運作範圍:0Hz~45kHz
時間:約30min
開始進行疏緩,讓耳機緩機,保留其延展性,讓驅動狀態穩定。

Frequency: 0Hz~45kHz
Time: 30 mins

Begin to ease-up the earphone for remaining the ductility and stabilise the driver.

START
PLAY
STOP
語言:繁中 / 日本語 / English

Notice: Uninitialized string offset: 0 in /home/chordmco/public_html/wp-includes/class-wp-query.php on line 3714